42
(GB)
Specifications
Laser beam (VPL-PX15/PX10 only)
Laser type Class 2
Wavelength 645 nm
Output 1 mW
General
Dimensions 325 × 110 × 285 mm (12
7
/
8
× 4
3
/
8
× 11
1
/
4
inches) (w/h/d)
(without the projection parts)
Mass VPL-PX15: Approx. 5.3 kg
(11 lb 11 oz)
VPL-PX10/PS10: Approx. 4.9 kg
(10 lb 13 oz)
Power requirements
VPL-PX15:
AC 100 to 240 V, 3.0
–1.25 A,
50/60 Hz
VPL-PX10/PS10:
AC 100 to 240 V, 2.9
–1.2 A,
50/60 Hz
Power consumption
VPL-PX15: Max. 300 W
(Standby mode: 4.9 W)
(When INPUT-B FUNC. is set to
ON: 9.0 W)
VPL-PX10/PS10: Max. 290 W
(Standby mode: 4.7 W)
Heat dissipation VPL-PX15: 1023.9 BTU
VPL-PX10/PS10: 989.6 BTU
Operating temperature
0 °C to 35 °C (32 °F to 95 °F)
Operating humidity
35 % to 85 % (no condensation)
Storage temperature
–20 °C to 60 °C (–4 °F to 140 °F)
Storage humidity 10 % to 90 %
Supplied accessories
Remote Commander RM-PJM15
(VPL-PX15/PX10 only) (1)
Remote Commander RM-PJM11
(VPL-PS10 only) (1)
R6 (Size AA) batteries (2)
HD D-sub 15-pin cable (2 m) (1)
(1-791-992-21)
PS/2 Mouse Cable (2 m) (1)
(1-792-424-12)
USB cable A type
– B type (1)
(1-790-081-11)
CD-ROM (Application software)
(1)
Strap for Remote Commander
(VPL-PX15/PX10 only) (1)
AUDIO: Stereo minijack 500
mVrms, impedance more than 47
kilohms
INPUT A INPUT A: HD D-sub 15-pin
(female)
Analog RGB/component:
R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative
(75 ohms terminated)
B/B-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync
input: 1-5 Vp-p high impedance,
positive/negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative
VD: Vertical sync input: 1-5
Vp-p high impedance, positive/
negative
AUDIO: Stereo minijack
500 mVrms, impedance more
than 47 kilohms
MOUSE 6-pin (female) (For details, see
“Pin assignment” on page 43
(GB).)
INPUT B (VPL-PX15 only)
ETHER
10BASE-T standard
100BASE-TX standard
PC CARD slot
PC CARD slot Type II
USB hub Up (B type: female) × 1
Down (A type: female) × 1
CONTROL S IN/PLUG IN POWER
Stereo minijack 5 Vp-p, plug in
power, 5 V DC
Safety regulations
UL1950
cUL (CSA No. 950)
FCC Class A
IC Class A
NEMKO (EN60950)
CE (LVD, EMC)
C-Tick
AC power cord (1)
Air filter (for replacement) (1)
Lens cap (1)
Operating Instructions (1)
Operating Instructions for
Networking (VPL-PX15 only) (1)
Installation Manual for Dealers (1)
Specified/recommended PC Card/
Wireless LAN Access Point
(VPL-PX15 only) (1)
Quick Reference Card (1)
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp LMP-P202 (for replacement)
Projector Suspension Support PSS-610
Monitor Cable
SMF-410 (HD D-sub 15-pin (male) y HD D-sub
15-pin (male))
Signal Cable
SMF-402 (HD D-sub 15-pin (male) y 3 × phono
jack)
Signal Adapter
ADP-20 (Macintosh y HD D-sub 15-pin)
Projection Lens
Short Focal Length Converter Lens VPLL-CW10
Long Focal Length Converter Lens VPLL-CT10
Some of the items may not be available in some areas. For
details, please consult your nearest Sony dealer.
To Next Page
Loading...
