To Next PageTo Next Page
Need help?Do you have a question about the SOR 200 series and is the answer not in the manual?
Explains float mechanism for series 100, 200, 300, 108/208, 400.
Explains displacer mechanism for series 700, 730, 740, 750, 800.
Details on product quality, warranty, materials, construction, gaskets, and trim.
Information on switch types, housings, quality assurance, and safety certifications.
Details on factory engineering support and customer service.
Explains the structure and components of the level switch model number.
Outlines the steps for selecting components and building a model number.
Guide to selecting models based on pressure, specific gravity, and temperature.
Options for chamber, trim materials, and process connections for the 100 Series.
Typical set points and physical dimensions for 100 Series models.
Guide to selecting models based on pressure, specific gravity, and temperature.
Options for chamber, trim materials, and process connections for the 200 Series.
Typical set points and physical dimensions for 200 Series models.
Guide to selecting models based on pressure, specific gravity, and temperature.
Options for chamber, trim materials, and process connections for the 108/208 Series.
Physical dimensions for 108/208 Series models.
Guide to selecting models based on pressure and specific gravity.
Details on process connection material and internal trim options.
Physical dimensions for 300 Series standard and tandem float units.
Guide to selecting models based on pressure and specific gravity.
Options for chamber, process connection, and trim material for the 400 Series.
Chamber dimensions, housing options, and related details for the 400 Series.
Guide to selecting models based on pressure and specific gravity.
Options for chamber, process connection, and trim material for these series.
Typical set points and physical dimensions for 741-743/802 Series.
Guide to selecting models based on pressure and specific gravity.
Options for chamber, process connection, and trim material for these series.
Typical set points and physical dimensions for 740/804 Series.
Guide to selecting models based on specific gravity and connection type.
Details on process connection material, styles, and internal trim options.
Physical dimensions for 700 Series narrow and wide differential units.
Guide to selecting models based on specific gravity and connection type.
Details on process connection material, styles, and internal trim options.
Physical dimensions for 730 Series narrow and wide differential units.
Guide to selecting models based on specific gravity and connection type.
Details on process connection material, styles, and internal trim options.
Physical dimensions for 750 Series models.
Details on standard dry-contact, mini-hermetic, and anti-vibration switch types.
Information on pneumatic and extreme temperature switch mechanisms.
Details electrical ratings and important notes for switch mechanisms.
Information on various housing types, materials, and enclosure ratings.
Chart showing housing designators, ratings, and agency listings for compatibility.
Guide to available accessories and their compatibility with different model series.
Tables showing available test certificates for float and displacer operated switches.
Details on straight (ET) and finned (FE) extensions for high-temperature applications.
Guide for selecting materials and switches based on temperature and process type.
Options for ASME/ANSI conformance certificates and fluid service categories.
Details on weld examination types and hydrostatic pressure testing procedures.
Explains Manual Check (MC) and Tru-Check (TC) options for displacer switches.
Chart listing ASTM materials used for components and their temperature limits.
Information on standard flange face finishes and their roughness values.
Table showing water properties (pressure, temperature, specific gravity) for saturated steam.
Provides formulas for converting pressure, specific gravity, length, temperature, and flow rates.
Tables listing approximate weights for standard models, flanges, and fittings.
General