SoundCraft Si Series User Manual

Page 3 - 5Soundcraft® Si Series User Guide
CHANNEL MODE (VCS)
In this mode all of the encoders and upper OLED zones are used together to display and change settings for
one selected channel. This collective function is called the Virtual Channel Strip (VCS).
The VCS concept is best understood when compared with a typical analogue channel strip as shown below.
In this example the EQ controls of channel 6 are highlighted. This corresponds to the SEL button of channel
6 being active, and the EQ button from the Channel Mode options being selected.
The highlighted controls in the analogue equivalent above represent what will be displayed on the VCS, which is
displayed to the right of it, the VCS has been rotated through 90° to make the comparison more complete.
EQ

SoundCraft Si Series Specifications

General

Model Variants	Si Expression, Si Performer, Si Compact, Si Impact
Built-in Effects	Lexicon effects engine
Type	Digital mixer
EQ Bands	4-band EQ per channel
Subgroups	4 subgroups
Effects Engines	Lexicon effects engine
Faders	Motorized faders
Display	Varies by model
Dimensions	Varies by model
Weight	Varies by model