Spaceman 6350 - Set Menu





 


 


1. Press RESET to stop all machine funcons. Press and hold RESET
unl display shows sengs. Press RESET to reach the Auto
Programming seng. If you scroll past the Automac Mode
Programming seng, connue pressing RESET unl it comes back
around.
2. Press FREEZE to toggle cursor between elds. Once highlighted, a
eld can be changed.
3. Press STANDBY to increase highlighted number.
Press P to decrease highlighted number.
4. Press and hold ICE CREAM buon for 3 seconds to save changes.
1. Press RESET to stop machine funcons. Press and hold RESET unl
display shows sengs.
2. Press RESET to reach the Language seng. If you scroll past the
Language seng, connue pressing RESET unl it comes back
around.
3. Press STANDBY and P buon to change the language.
4. Press and hold ICE CREAM buon for 3 seconds to save changes.