H.264 Network Digital Video Recorder User Manual
Page 23
4 Main menu
4.1 Main menu navigation
Main menu Sub menu Function
Record Config Set the recording configuration, recording type, recording time section
playback Set recording look-up, recording play, video file storage
backup Detect or format backup equipment, back the selective files
Alarm Motion
detection
Set motion detect alarm channel, sensitivity, area, linkage parameters: defending
time section, alarm output, screen hint, recording, PTZ, patrol
Video
blind
Set camera mask alarm channel, sensitivity, linkage parameters: defending time
section, alarm output, screen hint, recording, PTZ, patrol
Video
loss
Set video loss alarm channel, linkage parameters: defending time section, alarm
output, screen hint, recording, PTZ, patrol
Abnormality Set alarm actived by no disk,disk error and disk no space
System
configuration
General
configuration
Set system time, data format, language, hard disk full time operation, machine
number, video format, output mode, summertime, stay time
Encode
configuration
Set main(assistant)coding parameter: code mode, resolving ability, frame rate, code
stream control, image quality type, code stream value, frame between value,
video/audio enable
Network
configuration
Set basic network parameters, DHCP and DNS parameters, network high speed
download
NetService PPPOE.NTP.Email.IP purview.DDNS parameter
GUI display Set channel name, preview hint icon state, transparency, cover area, time title,
channel time fold
PTZ
configuration
Set channel, PTZ protocol, address, baud rate, date bit, stop bit, check
Tour Set patrol mode and interval time
Management
tools
Hard disk
management
Set appointed hard disk as read-write disc, read-only disc or redundant disc, clear
data, resume date and so on
User
management
Modify user, team or password. Add user or team. Delete user or team.
Online user Break the connection with the already login user. Lock the account after break until
booting up again.
To Next Page
Loading...