H.264 Network Digital Video Recorder User Manual
Page 16
3.5.3 Record Mode
Please check current channel status: “○” means it is not in recording status, “●” means it is in recording
status.
You can use desktop shortcut menu or click [main menu]> [recording function]> [recording set] to enter
the recording control interface.
Picture 3.8 Record Mode
【Schedule】Record according to the configuration.
【Manual】Click the all button and the according channel is recording no matter the channel in any state.
【Stop】Click the stop button and the according channel stops recording no matter the channel in any state.
3.5.4 PTZ control
Operation interface is as followed. The functions include: PTZ direction control, step, zoom, focus, iris, setup
operation, patrol between spots, trail patrol, boundary scan, assistant switch, light switch, level rotation and so
on.
Note1. Decoder A(B)line connects with DVR A(B)line. The connection is right.
2. Click [main menu] >[system configuration] >[PTZ setup] to set the PTZ parameters.
3. The PTZ functions are decided by the PTZ protocols.
Picture 3.10 PTZ setup
【Speed】Set the PTZ rotation range. Default range: 1 ~ 8.
【Zoom】Click
/ button to adjust the zoom multiple of the camera.
【Focus】Click
/ button to adjust the focus of the camera .
To Next Page
Loading...
