H.264 Network Digital Video Recorder User Manual
Page 49
the damaged hard disks, then install a new one.
* behind serial number means the current working disk such as 1*. If the corresponding disk is damaged, the
information will show “？”.
4.6.2 BPS
Display the code stream（Kb/S）and hard disk capability （MB/H）in real time. It displays as the wave sketch
map.
Picture 4.44 BPS
4.6.3 LOG
Look up system log according to the set mode.
Log information include: system operation, configuration operation, data management, alarm affair,
recording operation, user management, file management and so on. Set the time section to look up and click
the look up button. The log information will display as a list. (one page is 128 items) Press Page up or Page
down button to look up and press delete button to clear all the log information.
Picture4.45 LOG
To Next Page
Loading...
