User’s manual EXPERT 1K-FA
Pag. 29 of 76
be much less. SPE suggests you monitor your transmission to check that
the “MIC GAIN” setting is correct. In case of very heavy use, it is advisable
to work in “Contest” condition to take advantage of the greater efficiency
of the fans.
Note: if you choose to set the output power of the amplifier by varying the output power of
the transceiver, the ALC connection is not required.
Note: ATTENTION, never stress the amplifier with long periods in key-down transmission, as
this can stress the amplifier components.
Note: in SSB the use of the compressor is recommended only when necessary; this strongly
reduces the temperature increase.
To Next Page
Loading...
