SPE EXPERT 1K-FA - RS-232 CAT Settings; NO CAT Settings

User’s manual EXPERT 1K-FA
Pag. 57 of 76
18.13 RS-232 CAT Settings
[
SET
]
Note: RS-232 CAT interface is an internal link connected to the serial interface connector used
for EXPERT’s remotization that has to be made using a suitable PC software. Further
details concerning this kind of interface can be found by consulting the document
“Communication Protocol Specifications Rev. 2.0” freely available from the EXPERT
linear amplifier’s website (http://www.linear-amplifier.com
).
18.14 NO CAT Settings
Note: this choice disables any kind of CAT interface and is the right one to choose when the
used transceiver is not inside the supported models and, then, this link cannot be used.
[
SET
]
[
SET
]
[SET]
[SET]
[
SET
]