| Description | 6
Spectral response
Illumination for hyperspectral imaging must always have a continuous spectrum that covers the full wavelength
range, over which the hyperspectral camera is operating. If the illumination does not have signal in some of the
wavelengths, the measured data on those wavelengths is not valid.
The recommended options for Specim FX are halogen-based and sunlight illumination solutions.
Figure 1: Halogen Spectrum
Figure 2: Sunlight Spectrum
Figure 3: LED Spectrum
All rights reserved - Specim, Spectral Imaging Oy Ltd.
To Next Page
Loading...
Need help?
General
