Specim FX10 Series - Change History

| Change History | 51
Change History
Date Version Description
2020 2.2
• Document name changed from
Reference Manual to User
Manual. This change does not
affect the version numbering;
User Manual 2.2 follows the
Reference Manual 2.1.
• Added default lens information
• Corrected trigger and strobe
timing table information
• Updated Default Settings and
Calibrations section
• Removed Line Pause from Frame
Grabber Relevant Configuration
• Restructured AIE information
12 November 2019 2.1
• Added hyperspectral imaging and
illumination overviews
• Added the spectral response
graph
• Added default settings and
calibrations information
• Additional information about
triggering via power connector
• Minor typo corrections
27 March 2019 2.0
• Added the possibility for
firmware update
• Added possibility to change the
readout mode
• Updated the GigE LED
information
• Added the results of vibration,
shock and operation temperature
tests
20 December 2018 1.1 Corrected grabber information
18 July 2018 1.0 First version
All rights reserved - Specim, Spectral Imaging Oy Ltd.