Spectra Precision Focus 30 - Page 61

Spectra Precision FOCUS 30 User Guide 45
4 Setup
Face2 Display while using Spectra Precision Survey Pro in different
Instrument Versions
StepDrive and LockNGo:
If the field software at Control Unit Face1 is
started, the field software controls the
Face2 display.
Screen Actions and Comments
Fig. 4-24 F2 Display while controlled via F1 program
HA: 290.1609
ZA: 200.4722
SD: 2.780 2.780
1
3
2
The Face2 display always shows measurement
results parallel to the Face1 Control Unit.
1. SD value from the last
measurement jumps to
left.
2. Symbols for prism or r
eflectorless target
3. Symbol moves and shows the measurement
progress. A dif
ferent symbol will show the
status LockNGo.
Note – While using the field software in
every menu the Main Menu from the Face2
display can be opened with a long P key
press!
Robotic version: 
If you are using an external controller (independent with radio or cable) with field
softw
are that has been started, the controller with field software controls Face2 dis-
play.
Screen Actions and Comments
Fig. 4-25 F2 Display in instrument version Robotic
Instrument Status
Connected
Radio channel: 3
Network ID:
3
The Face2 Display in this configuration shows
no measurement results.
Note – While using the field software at the
external Control Unit the Level Menu or
Main Menu from the Face2 display can be
opened.