Spectra Precision SP90m - MEM: Setting Current Memory; MODE: Setting Receiver Mode

99
MEM: Setting
Current Memory
Send this SMS to change the memory used by the receiver.
This may be the internal memory or an external SD card
connected to the receiver.
Command Syntax:
MEM<sp>INT
or
MEM<sp>SD
Example 1: Choosing the internal memory
MEM INT
SP90m 5703A00116
11:05:09
MEM INT: OK
Example 2: Choosing the external SD card:
MEM SD
SP90m 5703A00116
11:05:18
MEM SD: OK
MODE: Setting
Receiver Mode
Send this SMS to change the receiver’s operating mode: rover
or base.
Command Syntax:
MODE<sp>BASE
or
MODE<sp>ROVER
Example 1: Selecting Base Mode
MODE BASE
SP90m 5703A00116
11:12:25
MODE BASE: OK
Example 2: Selecting Rover Mode
MODE ROVER
SP90m 5703A00116
11:12:45
MODE ROVER: OK