Spectra Precision SP90m - Upgrading the Receiver Firmware; SP Loader Software Utility

102
REC: Setting the
Recording Mode
Send this SMS to control raw data recording in a remote
SP90m.
Command Syntax:
1) Starting recording raw data to the current memory at the
currently selected recording rate:
REC<sp>ON
2) Starting recording raw data to the current memory at the
specified recording rate:
REC<sp>ON<sp>{recording_rate}
3) Ending raw data recording:
REC<sp>OFF
Example 1: Starting raw data recording at 0.1 second:
REC ON 0.1
SP90m 5703A00116
11:32:04
REC ON 0.10: OK
Example 2: Ending raw data recording:
REC OFF
SP90m 5703A00116
11:35:19
REC OFF: OK