9
Equipment Description
Front Panel
• [1]: External Bluetooth/WiFi antenna connector. A coaxial
female connector (reverse SMA type) allowing you to
connect a Bluetooth or WiFi antenna for wireless
communication with a field terminal or any other device.
• [2]: Power button.
To turn on the receiver, press the Power button for about
two seconds until the power LED [5] turns solid green,
then release the button. The receiver will automatically
complete its initialization phase before it starts operating
normally.
To turn off the receiver, press the same Power button for
about two seconds. The Power LED will blink green until
the receiver gets turned off.
• [3]: Display screen. The display consists of a 128 x 64-
pixel, 1.5-inch monochrome blue-gray OLED screen.
Used in conjunction with the direction keys, the OK and
Escape keys, the display screen allows you to view and
edit different pages of information. See Receiver User
Interface on page 26 for a detailed description of the
information available from this screen.
After a few seconds of keypad inactivity, screen luminosity
is turned off.
• [4]: Keypad including four direction keys and a central OK
key. See details on page 26.
[1]
[6]
[7] [8][8]
[2]
[5]
[3] [4]
To Next Page
Loading...
