44
Power-Off Screen Hold down the Power button for a few seconds. The Spectra
Precision logo will appear on the screen.
After a few seconds, the message “Powering off...” will follow,
indicating that the receiver is being turned off.
If the anti-theft protection is still enabled when you ask for
receiver power-off, a message will ask you to confirm your
request.
If you wish to keep using the anti-theft protection, press OK
and then the receiver will complete the power-off sequence
as described above.
If you want to remove the anti-theft protection before turning
off the receiver, press Escape, go back to Advanced Settings to
remove the anti-theft protection (see page 36). Then you can
turn off the receiver as explained above.
To Next Page
Loading...
