8
Upgradable
Firmware Options
These firmware options can be purchased separately to
upgrade the receiver.
NOTE: The result of a separate purchase is a POPN (Proof Of
Purchase Number) emailed to the buyer. The POPN is then
entered in the receiver using the SP Loader software utility
(see page 114) to activate the purchased firmware option.
Other Optional
Accessories
Other accessory kits (cables, antennas, radios) may be used
with the SP90m. Please contact your distributor for more
information.
ID Designation Part Number
8 Fast Output (50 Hz) 113329-01
c Embedded NTRIP Caster 113329-02
@1 Worldwide use (disables pre-installed Geofencing) 113329-03
In order to use the Trimble RTX service Center-
Point RTX, a subscription is required..
The result of the purchase will be a code that you
will have to type in, in the same way as you would
do to activate a firmware option in the receiver
using the Web Server.
Visit Trimble RTX
website to purchase
a subscription.
To Next Page
Loading...
