3
• Screen orientation: Normal
• Screen timeout: 10 minutes
•Buzzer: ON
• Automatic receiver power-on and power-off: Disabled
• ATL Recording: OFF
• Access to Web Server: Protected. The default login is
"admin" and the default password is "password". These
may be changed using the Security tab in the Web Server.
Customizing
Receiver Operation
• If you wish to change the configuration, you need to:
– Run the Web Server: see Getting Started With the Web
Server on page 47.
– Then choose your operating mode and follow the
instructions to make it operational: See Using SP90m
With a Single Antenna on page 56 or Using SP90m
With Two Antennas on page 70.
The current status of the receiver can be seen at all
times at the top of the window after clicking on .
NOTE: Web Server functions not described in this
manual are covered in the on-line context-sensitive help.
• In all those applications where the Spectra Precision
Survey Pro field software will be used, the configuration
steps needed before operating the receiver in the
requested mode may be taken directly from within Survey
Pro. Typically in this case, a Bluetooth connection will be
used between the data controller running Survey Pro and
the SP90m.
NOTE: Some configuration changes can also be made directly
from the receiver’s front panel. See Receiver User Interface
on page 26.
1
Coaxial cable
GNSS Antenna
Bluetooth/WiFi
Antenna
Powered from Internal Battery
Data Controller
running
Survey Pro
Bluetooth
To Next Page
Loading...
