42
• Set the data format then press OK.
Raw Data
Recording
When you access the Record screen, the following
information is displayed:
• Status: ON or OFF
• Storage medium: Memory or USB key
The Record screen being displayed, press the OK button to
enter the edit mode. From there, you can choose to start a
Static or Stop & Go data recording. See flowchart below.
OK
OK
OK
OK
OK
OK
OK
In progress
Please wait.
OK
OK
OK
OK
OK
OK
(See details in the
lower left corner)
(See details in the
lower left corner)
(See details in the
lower left corner)
(See details in the
lower left corner)
OK
Edit Site Name
Session #2
Session #1
Memory
Site
Name
(If USB key connected to front panel, recording is
possible in Static or Stop & Go directly on USB key)
To Next Page
Loading...
