Spectra Precision SP90m - Receiver Mode

39
Receiver Mode See flowchart and explanations below.
When you access the Receiver Mode screen, the following
information is displayed:
• Receiver Mode status: Current receiver operating mode. It
can currently be used as a base or a rover.
• Ref. Position: The type of position currently defining the
base location. The base may be “Moving” or “Static”
(“Static” being the result of selecting either “Current” or
OK
OK
OK
OK
OK
OK
OK
OK
Receiver Mode
{Rover or Base}
{Moving or Static}
Ref. Position
{Coordinates if “Static”,
otherwise just
“Moving” report ed}
Antenna
{Antenna model}
{Height value, V or S}
Base Settings
{Current Station ID}
{Port ID}
{Data format}
Receiver Mode
>Rover
Base
Position Type
{Current Setting}
OK
Antenna Name
{Current setting}
OK
Station ID
{Current setting}
OK
Station ID
{Set value}
Antenna Height
{Current setting}
Ref. Position
Last
Current
Set Ref. Position:
- Latitude
- Longitude
- Height
Position Type
- L1 phase center
- Survey point
- Antenna ref. point
OK
OK
Antenna Name
ASH 111661
Zephyr 3 Base
Zephyr 3 Rover
GA830 Marine
GNSS Choke Ring
SPGA Rover
OK
OK
OK
OK
OK
OK
Antenna Height
Set Height value
and type (V/S)
In progress
Please wait.
Output Data
{Port ID}
{Data Format}
If other antenna
added, will appear
at the top of the list
Set port Set data format