38
When this screen is visible, you are prompted to unlock
the receiver (“Unlock receiver?” displayed). Just press OK,
enter the password and press OK again to make the
receiver fully operational.
When the startup protection is active, the receiver does
not display or/and output its results of position
computation.
6. Anti-Theft: This screen allows you to enable or disable the
anti-theft protection. You need to enter the correct
password if you want to remove the anti-theft protection.
7. Bat. Charging: Use this option to enable or disable the
charging of the internal battery from an external DC
source, when present at the power input. This option is
enabled by default. Turning battery charging off may be
useful when the external power source used is also a
battery and you want to save energy from this battery.
To Next Page
Loading...
