104
Notification E-mails
As the administrator of the SP90m receiver, you may
configure your system to be informed via email of possible
malfunctions detected by the receiver. This will allow you to
quickly respond to the email alert by taking the appropriate
maintenance steps.
You may choose between three different levels of notification:
• Full notification. Each of the following events will
generate an email:
– “High” and “medium” alarms
– Receiver powered on
– Power shutdown causing the receiver to operate from
its internal battery.
• Standard notification. Each of the following events will
generate an email:
– “High” alarms only
– Receiver powered on
– Power shutdown causing the receiver to operate from
its internal battery.
• No notification at all.
Remember the receiver may report three categories of alarms:
• “High” alarms, indicative of serious problems
• “Medium” alarms
• “Low” alarms
The receiver is not designed to process incoming emails. It is
therefore no use replying to an alarm email.
Example of notification email:
Administrator
Computer
Ethernet
SP90m
SMTP Server
Internet
Alarm email
Alarm email
To Next Page
Loading...
