Spectra Precision Trimble UL 633N - 6.13 Service; 6.14 RC603 N Service menu; 6.14.1 RF IR options; 6.14.2 RF Connectivity

14
6.13 Service
PressandreleasetheMENUbuttonattheStandardDisplayandselectService(Pic41).Buttons
6/7 can be used to toggle between Calibration Y and Calibration XOR Calibration Z when
set up vertically.
Press and release button 4toconrmtheselection.Thecalibrationattheselectedaxisstartstheeldcalibration
procedure.
6.14 RC603N Service menu:
ThismenuisavailableonlyviatheRC603N.
6.14.1 RF IR options
Choosemenu‚RFIROptions‘(Pic45).Pressandreleasebutton4toconrmtheselectionand
selectoneofthefollowingoptions:
RFOn;IRauto=>Radioonalltimes;IRwillbeactivatedautomaticallyafterradioconnection
has been lost.
  RFOff;IROn=>RadioturnedOff;IRalwaysactivated
  RFOn;IROff=>RadioturnedOn;IRalwaysOff
Pic46RFOn;
IRAuto
Pic47RFOff;
IROn
Pic48RFOn;
IROff
6.14.2 RF Connectivity
Press and release button 4togetastatusofthecurrentRadioconnectivity(Pic49).
Pic 41
Service
Pic42
CalibrationY
Pic 43
CalibrationX
Pic 44
CalibrationZ
Pic45RFIR
Options
Pic49Radio
Connectivity