SpectraPure
®
SpectraPure
®
Inc.
480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
5
Four Outputs for Pumps:
Each of four outputs (identified as A, B, C, and D) is connected to a
separate pump. Each pump has full access to all pages, functions, and
inputs. Pumps are connected to the LM4 with male-to-male 3-conductor
cables. SpectraPure can provide cables of various lengths from 3 to 25
feet long. They are heavy-duty and shielded, and are recommended for
proper operation.
Four Inputs for Level Sensors:
All four inputs (labeled as 1, 2, 3, and 4) can connect to a variety of float
switches and water detectors (sensors). Any input can be “assigned” to
control any or all pumps. Sensors are connected to the LM4 with male-
to-male 3-conductor cables. SpectraPure can provide cables of various
lengths from 3 to 25 feet long. They are heavy-duty and shielded, and are
recommended for proper operation.
Wireless Connectivity:
The LM4 has wireless (WiFi–2.4Ghz) connectivity to allow changing
parameters using a PD. After the LM4 connects to a router, it will use an
IP address assigned by the router to send interactive pages to the PD. If a
router is not available, a private network is avalible to provide PD-to-LM4
communication.
Firmware Updates:
Updated firmware (new features and bug fixes) can be downloaded from
our website to your PD and then used to update the firmware in the LM4.
To Next Page
Loading...
