SpectraPure
®
SpectraPure
®
Inc.
480.894.5437 Call us toll-free 1.800.685.2783
2167 East Fifth St, Tempe, Arizona 85281
12
Water Exchange System:
This is a Water Exchange System that is protected on both
ends with Level Sensors.
Fresh Salt Water is dosed to the sump periodically.
An equal amount is dosed from the sump to drain.
Both Pumps will stop if either the reservoir is dry or the sump
has reached a critical level.
Parts List:
1x LM4 & Power Supply
2x Pumps
2x Sensors
4x EXT Cables, Length as Required
4x Tubing, 1/4”, Length as Required
Plumbing Connections:
Connect tubing from reservoir “A”to Pump “A”.
Connect tubing from Pump “A” to sump.
Connect tubing from reservoir “B”to Pump “B”.
Connect tubing from Pump “B” to sump.
Electrical Connections:
Connect one end of an EXT Cable (any length) to
a Level Sensor (Fresh Salt Water) and the
other end to Input “1”.
Likewise,
Connect Pump to Pump “B”.
Connect a Level Sensor (Sump) to Input “3”.
Connect Pump to Pump “D”.
Inputs Settings:
If Input#1(Fresh Salt Water) is DRY, then “B” & “D” are OFF
If Input#3(Critical Sump Level) is WET, then “B” & “D” are OFF
EXT Cables are available in 3 ft, 6 ft, 12 ft, and 25 ft lengths.
To Next Page
Loading...
