SS1000 Operator’s Manual 1–1
1 - INTRODUCTION
SpectraSensors SS1000 products are high-speed, diode-laser based extractive
analyzers designed for extremely reliable monitoring of very low (trace) to
standard concentrations of H
2
O or CO
2
in Natural Gas. In order to ensure that
the analyzer performs as specified, it is important to pay close attention to the
details of the installation and operation. This manual contains a comprehensive
overview of the SS1000 analyzer and step-by-step instructions on:
• Inspecting the Analyzer
• Setting up the Analyzer
• Powering Up the Analyzer
• Operating the Analyzer
• Serial Port Communications
• Powering Down the Analyzer
• Troubleshooting
Who Should Read This Manual
This manual should be read and referenced by anyone installing, operating, or
having contact with the analyzer.
How to Use This Manual
Take a moment to familiarize yourself with this Operator’s Manual by reading
the Table of Contents.
There are a number of options and accessories available for the SS1000
analyzers. This manual has been written to address the most common options
and accessories. Read each section in the
manual carefully so you can quickly
and easily install and operate the analyzer.
The manual includes images, tables, and charts that provide a visual
understanding of the analyzer and its functions. Special symbols are also used
to make you aware of potential hazards, important information, and valuable
tips. Pay close attention to this information.
UK Distibution by IMA Ltd Tel: +44 (0)1943 878877 Email: info@ima.co.uk Web: www.ima.co.uk
To Next Page
Loading...
