Introduction
101-92-4 A .ver 97020-00094
–3
Explosion hazard. Substitution of components may impair
suitability for Class I, Div. 2.
Explosion hazard. Do not connect or disconnect equipment unless
power has been switched off or the area is known to be non-
hazardous.
Always disconnect the main power to the instrument before
attempting any repair.
Read and understand all instructions before attempting to operate
the instrument. Observe all caution notes and warning labels.
Class IIIb invisible laser radiation. When open, avoid expo
sure to
beam.
Conforms to provisions of US 21 CFR1040 10. Class I laser
product. Refer servicing to the manufacturer’s qualified
personnel.
Use a damp cloth to clean display and keypad to avoid static
electric discharge.
Do not exceed 10 psig (0.7 barg) in sample cell. Damage to cell
may result.
Do not hold or carry the analyzer by the measurement heads or
sample cells. Doing so may result in optical misalignment
affecting the performance of the sensor.
When selecting an
analyzer, the
total system design must be
considered to ensure safe, trouble-free performance. Function,
sizing, proper installation, operation, and maintenance are
beyond the control of SpectraSensors and are the responsibilities
of the system designer and user.
UK Distibution by IMA Ltd Tel: +44 (0)1943 878877 Email: info@ima.co.uk Web: www.ima.co.uk
To Next Page
Loading...
