SS1000 Operator’s Manual
4
– 01-92-4 A .ver 97020-0009441
4. Press the * key repeatedly until the Modbus Address parameter is
displayed.
5. Enter the desired Modbus Address and press the * key to store the
value and cycle to the Modbus Mode parameter.
6. Enter the desired Modbus Mode and press the * key to store the
value.
7. Press the # key followed by the 1 key to return to Mode 1.The
analyzer is now ready to receive Modbus queries.
<SET PARAMETER MODE>
Modbus Address
1
Enter a value(1-250)
<SET PARAMETER MODE>
Modbus Mode
0
0:O 1:GMR 2:DMR
UK Distibution by IMA Ltd Tel: +44 (0)1943 878877 Email: info@ima.co.uk Web: www.ima.co.uk
To Next Page
Loading...
