BALANCE
Balance is an adjustable curve on all
channels to fine-tune the servo position
at up to seven points along the curve.
Use Balance to:
• Reduce the effects of round servo
horns so movement is more linear.
• Prevent binding when multiple servos
are used on a single control surface.
• Match throttle response on twin engine aircraft.
• Ensure the swashplate on a helicopter remains level throughout the range of travel.
Balance is not intended to be used to set travel, trim and reversing changes, but to
fine-tune the range of travel after those settings have been defined.
Point
values
Curve
Selected
channel
To Next Page
Loading...
