Spektrum iX14+ - Analog Switch Setup

ANALOG SWITCH SETUP
The Analog Switch Setup menu allows all sticks, sliders and knobs (analog input
devices using potentiometers) to be used as a kickpoint to activate functions like
mixes or dual rates.
Each input has two kickpoints between -100% to 100%. This range represents the
full travel, with 0% being center. Each section within the range of travel represents
a switch “position.”
-100%
100%0%
Switch
position 2
Switch
position 1
Pos 1-2
kickpoint
Pos 0-1
kickpoint
Switch
position 0