FILE SETTINGS
Touch the File Settings button to determine how the transmitter saves the telemetry
data file. By default, the transmitter is set to automatically create a data file in a
folder named “AutoLog.”
To change how the file is saved:
Enter the File Settings menu.
Next to Mode, touch Auto to select from a list of options.
• Auto saves the log file as described above. The file name for the log file is based
on the model name. Only the five most recent log files will be retained.
• Select Manual to create a file name, enable a switch to start the data logging,
enable “One Time” recording, and enable “Input Data” to record stick and switch
positions along with other telemetry data. This information can be helpful in
diagnosing flight conditions or crashes.
• Select Inhibit to disable data logging of telemetry data.
To Next Page
Loading...
