WIRED TRAINER
Wired Trainer enables a student and instructor to work together by physically
connecting two transmitters together with a cable.
The optional Spektrum wired trainer adaptor (SPMA3091, not included) and trainer
cable (SPM6805, not included) are required for wired trainer operation. The wired
trainer adaptor connects to the serial port on the back of the transmitter. The trainer
cable plugs into the adaptor.
Wired trainer supports up to 8 input channels with PPM based trainer systems
connected. If the iX14+ is used with a wired connection, the correct wired trainer
option must be selected in the trainer menu and the student mode started or the
wired trainer connection will not work.
To Next Page
Loading...
