BACK MIXING
Back Mixing applies to all related servos in a multi servo Aileron/Flapped wing or a
multi servo split elevator. Creating a mix to RAL (Right Aileron) or LAL (Left Aileron)
will create different results and enable you to use fewer mixes to achieve the
desired response.
Example 1: Creating a mix AIL > RAL will move the ailerons in opposite directions.
Creating a mix AIL > LAL will move the ailerons in the same direction.
Example 2: Creating a mix ELE > REL will move the elevator halves together.
Creating a mix ELE > LEL will move the elevator halves in the opposite direction
(tailerons).
IMPORTANT: Be sure the ailerons and/or elevators are plugged into the correct
left/right port for this function to work.
To Next Page
Loading...
