Servo Mode: Options are Default 22ms, Hybrid 11/22ms, 12@22 X+, or 14@22ms.
• Always use 22ms when using analog servos.
• Enabling 12@22, X+ defaults the frame rate to 22 ms. This also enables ac-
cess to all 20 channels available on the iX14+ through the XPLUS 8 module
(SPMXP8000), the Spektrum AR20310T or AR20400T receiver (SPMAR20310T,
SPMAR20400T, SPMAR20410T).
• When bound to a 14CH mode capable receiver, a 14CH mode option is available
which offers 14 channels at 22ms.
• 11ms settings require digital servos or direct communication with the Spektrum
serial signal (e.g., a flight controller).
DX18 Compatibility: Enable this option if the model file was created on or will be
used by a DX18 transmitter. This changes the transmitter channel mapping to the
unique configuration of the DX18.
To Next Page
Loading...
