The iX14+ automatically finds and configures the telemetry sensors upon binding.
Receiver voltage always defaults to slot eleven, and flight log data to slot twelve.
To configure the telemetry system:
1. Install and connect the telemetry sensors to a compatible Spektrum telemetry
receiver or module according to the instructions included with the sensors and
receiver/module.
2. Bind the receiver to the iX14+.
3. Configure the connected sensors.
To let the iX14+ determine the connected sensors: Touch the Auto
Detect Sensors button. The model must be bound, powered on and all sensors
connected.
To manually enter the connected sensors: Select the desired telemetry
slot. Select the relevant sensor from the popup, scrollable list. After selecting a
sensor, the sub-menu for that sensor will open.
To Next Page
Loading...
