5. With the switches chosen, a switch position table appears. The solid blue box in
the table indicates the current active position of the logical switch.
• Switch 1 moves the active position up and down in the table.
• Switch 2 moves the active position left and right in the table.
6. To change the order of the numbered switch positions touch the box position you
wish to change.
7. Select the numbered switch position desired from the dropdown menu, 0-9, until
the position order is as desired.
After the setup is complete, the logical switch can be chosen in the switch field of
various functions in the transmitter.
To Next Page
Loading...
