Swipe the “Sleep All” slider on the right side of the screen to put all functions in
sleep mode,
OR
Touch the Advanced Options bar to show individual sleep options.
Switch the radio signal (Spektrum RF), Screen and Bluetooth on or off as desired.
Swipe the “SWIPE TO APPLY” slider to apply the advanced sleep options.
Press the Power button once to wake the system from Sleep Mode.
IMPORTANT: The first time a double tap is used to bring up the SLEEP MODE
screen, the iX14+ may ask the operator for administrator privileges. Press accept
to give the Spektrum AirWare app permission to put the screen to sleep.
WARNING: Turning off the RF causes the iX14+ to stop sending control
signals. Do not turn off the RF when a model is powered on and
connected to the transmitter.
To Next Page
Loading...
