ADJUSTING TOUCH SWITCH SENSITIVITY
The touch sensitivity of the various switches can be adjusted through the Calibration
menu in System Settings.
1. From the dashboard, touch System Settings.
2. Touch the Calibration menu option.
3. Touch and hold PROCEED to continue to the Calibration screen.
4. Select Touch Sensitivity to access the Touch Switch Sensitivity menu.
5. Select on any of the values to adjust the sensitivity. The sensitivity of the switch
increases as the numerical value increases.
6. Touch the back arrow (
) to return to the Calibration menu or touch and hold
to return to the dashboard.
To Next Page
Loading...
