Select from the DEFAULT, TEMPLATE, or BNF setup options.
Use Default to create a model using default values for all model settings.
Use Template to start from a model template that has been saved to the iX14+
transmitter.
Use BNF to choose from pre-configured setups for many bind-n-fly products.
From there, you can add a new airplane, helicopter, sailplane, or multirotor model
by touching the expand icon (
) in the top right of the screen.
After selecting the model type and before binding, tap the Model Setup button from
the main screen in the Spektrum AirWare app to access the model setup options.
The most critical setup option is Aircraft Type which defines many pre-configured
options such as specialized mixing for multi servo wings, swashplates for
helicopters and other aircraft type-specific options. These options vary significantly
between aircraft types, and this should be set prior to binding.
To Next Page
Loading...
