HEAD TRACKING FPV SETUP
Wired FPV Mode: Enables the use
of a headset with head tracking or
another transmitter to control an
onboard camera gimbal by physically
connecting to the iX14+ with a cable.
The optional Spektrum wired trainer
adaptor (SPMA3091, not included) and
a trainer cable (SPM6805, not included)
are required for wired FPV operation. The
wired trainer adaptor connects to the
serial port on the back of the transmitter.
The trainer cable plugs into the adaptor.
The wired trainer is compatible with PPM
based trainer links.
To Next Page
Loading...
