CHANGE THE THROTTLE RATCHET
1. Locate the throttle strap adjustment screws on both gimbals. The ratchet set
screw engages a serrated section on the gimbal for a ratcheted throttle, while
the tension set screw engages a strap for smooth tension on the gimbal.
2. To engage the throttle ratchet, using a small Phillips screwdriver, turn the ratchet
set screw clockwise until the ratchet engages.
3. To disengage the throttle ratchet, using a small Phillips screwdriver, turn the
screw counterclockwise until the gimbal moves freely.
To Next Page
Loading...
