ADD A NEW MODEL
1. Touch the expand icon (
) at the top right corner of the Model Utilities screen.
2. Select Add a New Model from the drop down menu.
3. Select Default, Template or BNF from the pop up menu. Use Default to create
a model using default values for all model settings. Use Template to start from a
model template that has been saved to the iX14+ transmitter. See the following
pages for a description of the BNF template option.
4. Select the desired model option and select Create to continue.
5. The iX14+ will return to the Model Utilities screen and the new model will be
selected. Touch the new model to enter the Model Details screen or touch the
back arrow at the top left of the screen to return to the Dashboard.
TIP: Set up a generic model in each model type with desired switch assignments,
rates, curves, and other details; name the model, and save it as a template.
Future setups can be based on the saved template by selecting Template during
the process of adding a new model.
To Next Page
Loading...
