EasyManua.ls Logo

Sperry Marine VisionMaster FT - User Manual

Sperry Marine VisionMaster FT
674 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Part Number: 65900011-2 Printed in England December 2006
Revision: A
Ship’s Manual
Northrop Grumman Sperry Marine B.V.
118 Burlington Road, New Malden, Surrey, KT3 4NR England
Tel: +44 (0) 20 8329 2000 Fax: +44 (0) 20 8329 2415

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sperry Marine VisionMaster FT and is the answer not in the manual?

Summary

Warnings and Cautions

WARNING! - LETHAL VOLTAGE HAZARD

Describes dangers of exposed lethal voltages when covers are removed, emphasizing capacitor discharge.

WARNING! - RADIATION HAZARD

Instructs to stay clear of hazard zones around antennas and ensure radar is off when working on scanner units.

CHAPTER 1 Technical Specification

1 Radar System Performance

Details the performance specifications of the radar system, including range and bearing discrimination.

4 Transceiver Specification

Outlines the specifications for the transceiver, including mounting arrangements, transmitter, and receiver details.

7 Radar Specification

Details various radar specifications, including range scales, motion modes, and target data.

8 Transceiver Interface

Covers the interface between the transceiver and other system components, including standby/transmit and master/slave control.

CHAPTER 2 System Identification

2 System Identification Labels

Details the seven identifying labels used in VisionMaster FT Series Part Numbers for system identification.

3 Unit Type Numbers

Lists the various unit types that configure a VisionMaster FT Radar System.

CHAPTER 3 Installation

3 Safety Earthing

Details the critical safety procedures for earthing all company equipment with internal voltages greater than 50V AC.

CHAPTER 4 Configuration

CHAPTER 5 Diagnostics and Commissioning

2 Diagnostics

Details the diagnostic sub-menu functions available, including Software, Report, Buzzer, Version, and Tx/Rx configurations.

CHAPTER 6 Chart Installation

2 Chart Installer

Details the process of installing CMAP and SevenCs charts using the Chart Installer utility.

CHAPTER 7 Fault Reporting and First Line Servicing

2 Fault Identification and Isolation

Explains fundamental characteristics of VisionMaster FT units to simplify fault diagnosis.

CHAPTER 8 ROUTINE MAINTENANCE

2 Maintenance Plan

Provides details of recommended maintenance tasks, including interval, action, and notes for cleaning screens and filters.

CHAPTER 10 INTERSWITCH UNITS

CHAPTER 11 ADDITIONAL FEATURES

Sperry Marine VisionMaster FT Specifications

General IconGeneral
TypeMarine Radar
RangeUp to 96 nautical miles
Chart RadarYes
Operating Temperature-15°C to +55°C
FrequencyX-band (9 GHz) or S-band (3 GHz)
Display Size19-inch
Display TypeLCD
Resolution1280 x 1024 pixels
Power Output25 kW
Antenna Size12 ft
Antenna Rotation Speed24 RPM or 48 RPM
Target TrackingYes, with ARPA (Automatic Radar Plotting Aid)
AIS IntegrationYes
ComplianceIMO
IntegrationCompatible with ECDIS and other navigation systems
WeightVaries with configuration

Related product manuals