EasyManua.ls Logo

Sperry Marine VisionMaster FT - Monitor Unit; Label 1 Visionmaster FT Identifier; Label 2 Screen Size; Label 3 Monitor Type

Sperry Marine VisionMaster FT
674 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VisionMaster Ship’s Manual Chapter 2
System Identification Monitor Unit
65900011 2–7
3.1 Monitor Unit
The Monitor Unit type number consists of a five-figure number (e.g. 65923)
followed by a single letter suffix (e.g. C). A typical complete Monitor Unit Type
Number may therefore be 65923C. A further breakdown of the number is as
follows:
Figure 2.2 Monitor Unit Label
3.1.1 Label 1 VisionMaster FT Identifier
Fixed as 659
3.1.2 Label 2 Screen Size
Note: The 23” and 19” BridgeMaster E monitors (type 65823A and 65817G
respectively) may be used in kit systems.
3.1.3 Label 3 Monitor Type
Note: There is an independent On/Off switch for all monitors.
Note: All monitors have a buffered video output.
Label Diagonal
19 19" FST (250mm radar circle)
23 23" FST (340mm radar circle)
Label Monitor Series Variant and
Size
C 250/340 340 console (Hatteland)
M 340 340 console (Melford)
T 250/340 Desktop
659 23 C
Radar Identifier Label 1
Screen Size Label 2
Label 3 Display Type

Table of Contents