VisionMaster Ship’s Manual Chapter 3
Installation Display Unit
65900011 3–97
6.8.1 Display Unit
The Display Unit assembly includes a 19” (250mm) or 23.1” (340mm) flat
panel monitor for use with a 110/220 V AC power supply.
The monitor includes an independent On/Off switch and brilliance control.
The monitor is housed in a chassis. On the deck mounted console version
the chassis is attached to a pedestal; on the table top version the chassis is
mounted to the table top.
In the standalone console version the chassis is supplied with left and right
hand side cheeks.
Refer to the following figures for general information on the display unit.
• Figure 3.78 for the 340 Flat Panel Monitor outline drawing.
• Figure 3.79 for the Display Unit chassis with side cheeks
• Figure 3.80 for the Display Unit chassis with side cheeks removed (for an
existing console suite).
To Next Page
