To return to the original call and place the second call on hold, press the context
sensitive key beside the Switch icon. Use the context sensitive key beside the Switch
icon to toggle between the two calls.
To clear the call that you are currently connected to and return to the original call
press the Recall button, or wait for the other end to hang up.
Alternatively,
4 If you do not wish to answer the call press the context sensitive key beside the
Reject icon. The call will be cancelled or passed to your Forward on Busy number
(if set) or passed to voicemail (if enabled). (Please refer to your System
Administrator for further information on your Forward on Busy number.)
Please note that if you replace your handset while both calls are active you will connect the
two calls together.
Switch to Hands Free
You may wish to switch between hands free and handset operation without interrupting the
call.
From handset to hands free – press the Speaker button and replace the
handset.
From hands free to handset – lift the handset.
Please note that if you press the Speaker button while in hands free mode you will end the
call.
Mute a call
The Mute facility will allow you to prevent a caller from hearing, for example, your
conversation with another colleague.
1 Press the Mute button to mute your call.
2 The Muted message will appear in the centre of Call Status
3 Press the Mute button again to turn this feature off.
To Next Page
Loading...
