CS4000 Mini Controller with Ethernet
Page
5-18
T-38324-A 39-30-38324
2. Enter a name to identify this connection and select the Hyperterminal icon you
want to use for it. See Figure 5-17.
a. Enter a meaningful name for the Hyperterminal connection in the Name: field.
b. Select the shortcut Icon: for the Hyperterminal connection and click on it.
c. Click OK.
Figure 5-17. Select the Icon and Enter A Name for the
Hyperterminal Connection
NOTE: When you next want to use this connection all you need to do is
look for the shortcut icon under the Hyperterminal menu and
then click on it.
To Next Page
Loading...