TRANSMISSION AND BRAKE SYSTEM
6-7
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
To shift from “P”, the ignition switch must be turned to ON
and the brake pedal must be depressed.
If you cannot shift out of
“P”, check the followings:
- The ignition key is in “ON”.
- The brake pedal is depressed.
If you cannot shift out of “P” with the ignition switch in ON,
and the brake pedal depressed:
1. Apply the parking brake firmly and turn the ignition off.
2. Depress the brake pedal and push down the shift lock
release lever with a stick such as a pen. Then, shift the
lever to “N”.
3. Start the engine, release the parking brake, and place the
selector lever at “D”.
Brake pedal
Shift lever lock release
SHIFT LEVER LOCK RELEASE
Ignition “ON”
If this happens, have your vehicle repaired by the nearest
Ssangyong dealer or Ssangyong Authorized Service Center as
soon as possible.
WARNING
Q100-06-Transmission and Brake System.p65 2006-10-02, ¿ÀÈÄ 3:07Page 7 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
