INTERIOR SWITCHES
4-16
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ESP
OFF
(ELECTRONIC STABILITY PROGRAM) SWITCH AND ESP SYSTEM*
Blinking: When ESP is activated.
On: When ESP is deactivated (by pressing the ESP
OFF
switch).
When ESP system is defective.
When ESP is activated, the indicator light is blinking and
a warning buzzer sounds. If this indicator illuminates in
spite of an activated ESP, this means a malfunction of
the ESP system.
Stopping ESP Function With ESP
OFF
Switch
If the driving wheels are slipping on snowy or icy roads,
the engine rpm may not increase even when you de-
press the accelerator pedal, and accordingly, you may
not be able to move your vehicle. In this case, stop the
ESP function by pressing the ESP
OFF
switch. When the
ESP
OFF
switch is pressed, the ESP function stops and
the vehicle is driven independently from the sensor
outputs.
Resuming ESP Function With ESP
OFF
Switch
If you push the ESP
OFF
switch again when the ESP func-
tion is deactivated (the ESP warning lamp is turned on),
the system will be resumed and the ESP warning lamp
on the instrument cluster goes out by resuming the ESP
system.
ESP Warning Lamp
ESP
OFF
Switch
If you press the ESP
OFF
switch,
the ESP function stops and the
indicator lamp in the instru-
ment cluster comes on.
Press this switch again to re-
sume the ESP function. At this
time, the indicator lamp goes
out.
Q100-04-Interior Switches.p65 2006-10-02, ¿ÀÈÄ 3:06Page 16 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
Need help?
General
