IGNITION KEY, REMOTE CONTROL KEY
2-5
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Battery Replacement (With REKES)
1. Unscrew two screws from the rear cover.
2. Pry off the cover by using a small flat screwdriver.
Model: CR2032
3. Remove the battery and insert a new one.
When the operational distance noticeably decreases or the
remote control does not work occasionally, replace the bat-
tery with a new one.
Battery Specifications
CR 2032 (Rekes key type)
V 625U (without Rekes)
One
Model
Amount
BATTERY REPLACEMENT
• Use only the specified battery.
• Make sure that the battery is installed in correct direction.
CAUTION
Battery Replacement (Without REKES)
To replace the battery in the key without REKES, open the
cover.
Q100-02-Ignition Key, Remote Control Key.p65 2006-10-02, ¿ÀÈÄ 3:05Page 5 Adobe PageMaker 6.5K/Win
To Next Page
Loading...
